|  Loc-A-Bloc® - Australian Made, Designed & Patented  |  Classic Feature Retaining Wall Solutions  |  NSW - Australia  |
     
Home
About LOC-A-BLOC®
Product Brief
> 400 Series
> 600 Series
> 1800 Series
Project Examples
Architectural
Construction Guide
Questions & Answers
Quality Assurance
Contact Us























400 Series.

The LOC-A-BLOC® System of engineering, decorative retaining walls is comprised of the 400 Series together with a range of matching finished components.

For technical details, please consult the LOC-A-BLOC® design manual or discuss your specific needs with a Company representative. Individualised finishing components unique to your project can be manufactured on request.

> Packing & Delivery Information

> Size Comparison of the three LOC-A-BLOC® Series (400, 600 & 1800)

Standard Block Components.
       
Component
Part No
Diagram
(not to scale)
Description
Approx Weight
(kg)
       
400 SSS

Single side bolstered standard component.
400 x 200 x 200 mm.
12.5 units / square face metre

27
       
405 HSS

Single side bolstered standard half block component.
200 x 200 x 200 mm

15
       
400 CSS
Single side bolstered corner component. Front and one end bolstered.
26
       
405 HCS

Single side bolstered half corner component. Front and one end bolstered.
200 x 200 x 200 mm.

17
       
445 SSS

Single side bolstered angle component. Used to attain a 45° angle.
400 (on face) x 200 x 200 mm.

25
       
445 HSS
Single side bolstered half angle component
200 [on face] x 200 x 200mm
9
       
400 SSC

Standard component for convex walls with radii of 2 m. or more.
400 (on face) x 200 x 200 mm.

27
       
400 SDS

Double side bolstered standard component.
400 x 200 x 200 mm.
12.5 units / square face metre.

30
       
405 HDS

Double side bolstered half component.
200 x 200 x 200 mm.

17
       
400 CUD

Double side bolstered universal corner component.
400 x 200 x 200 mm.

26
       
400 CIS

Single side bolstered internal corner component.
400 x 200 x 200 mm.

24
       
400 EDS

Double side bolstered component.
400 x 200 x 200 mm.

30
       
405 HDE

Double side bolstered standard half end component.
200 x 200 x 200 mm.
18
       
400 SFF

Standard component with flat facing suitable for signage.
400 x 200 x 200 mm.

26
       
405 HFF
Half standard component with flat facing suitable for signage.
200 x 200 x 200mm.
15
       
400 SNF

Standard blank component without facing.
400 x 200 x 200 mm.
24
 
   
405 HNF
Standard blank half component without facing.
200 x 200 x 200mm.
12
 
   
400 NFC

No face convex component.
400 [ on face ] x 200 x 200mm

24
 
   
400 RSS
As for 400 SSS with 50mm dia. relief pipe.
Approximately every third or fourth unit in run.
26
 
   
400 RNS
As for 400SNF with 50mm dia. relief pipe.
Approximately every third or fourth unit in run.
23
 
   
400 RSC
As for 400SSC with 50mm dia. relief pipe.
Approximately every third or fourth unit in run.
26
 
   
400 RNC
As for 400NFC with 50mm dia. relief pipe.
Approximately every third or fourth unit in run.
23
 
Dry Mix Components.
       
Component
Part No
Diagram
(not to scale)
Description
Approx Weight
(kg)
       
400 NSV

Bolstered veneer used to match Loc-A-Bloc structures with
existing walls.
400 x 200 x 35 mm.
3
       
400 SPB

Pier block bolstered on all four sides.
400 x 400 x 200 mm .

60
       
400 SPC

Standard pyramid cap for use with the pier block.
460 x 460 x 35/90 mm.

22
       
400 SAC

Standard apex cap.
400 x 260 x 35/85 mm.

11
       
480 SBC

Single bolstered edge capping.
600 x 280 x 80 mm.

23
       
480 DBC

Double bolstered edge capping.
600 x 280 x 80 mm.
20
       
480 SRC

Single rounded edge capping incorporating drip moulds.
600 x 280 x 80 mm.

22
       
480 DRC

Double rounded edge capping incorporating drip moulds.
600 x 280 x 80 mm.

22
       
Single Pour Wall Components.
       
Component
Part No
Diagram
(not to scale)
Description
Approx Weight
(kg)
       
400 FNS
No face standard footing component.
400 x 200 x 200mm with 45mm cut out of two back corners.
23
       
400 FSS
Single side standard footing component.
400 x 200 x 200mm with 45mm cut out of two back corners.
26
       
400 FNC
No face convex footing component.
400 [on face] x 200 x 200mm with 45mm cut out of two back corners.
23
       
400 FSC
Single side convex footing component.
400 [on face] x 200 x 200mm with 45mm cut out of two back corners.
26

Click here to download "Component List" PDF Version of this page for printing

^ Top of Page
     
|  ©2008 - 2010 LOC-A-BLOC® Australia Pty Ltd  | E: office@locabloc.com.au  |  T: (02) 4648 1187  |  Disclaimer |
|  Website by D-Zine Group |