Classic Feature Retaining Wall Solutions   |  LOC-A-BLOC - Australian Owned, Made and Designed   |  NSW - Australia  |

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
     

600 Series.

The LOC-A-BLOC System of engineering, decorative retaining walls is comprised of the 600 Series together with a range of matching finished components.

For technical details, please consult the LOC-A-BLOC design manual or discuss your specific needs with a Company representative. Individualised finishing components unique to your project can be manufactured on request.

> Size Comparison of the three LOC-A-BLOC Series (400, 600 & 1800)

Standard Block Components - Also suitable for marine applications.
       
Component
Part No
Diagram
(not to scale)
Description
Approx Weight
(kg)
       
600 SSS

Single side bolstered standard component.
600 x 300 x 300 mm. 5.5 units / square face metre.
95
       
605 HSS

Single side bolstered standard half block component.
300 x 300 x 300 mm.
47
       
600 CSS

Single side bolstered corner component. Front and one end bolstered. 600 x 300 x 300 mm.

96
       
605 HCS

Single side bolstered half corner component. Front and one end bolstered. 300 x 300 x 300 mm.
52
       
645 SSS

Single side bolstered angle component.
Used to attain a 45° angle. 600 (on face) x 300 x 300 mm.

83
       
645 HSS

Single side bolstered half angle component.
300 (on face) x 300 x 300 mm.

36
       
600 SSC

Standard component for convex walls with radii of 3m or more.
600 (on face) x 300 x 300 mm.

95
       
605 HSC

Half single sided convex block.
300 [ on face ]x 300 x 300mm.
47
       
600 SDS

Double side bolstered standard component.
600 x 300 x 300 mm. 5.5 units / square face metre.

96
       
605 HDS

Double side bolstered half component.
300 x 300 x 300 mm.

50
       
600 CUD

Double side bolstered universal corner component.
600 x 300 x 300 mm.

96
       
600 CIS

Single side bolstered internal corner component.
600 x 300 x 300 mm.

89
       
600 EDS

Double side bolstered component.
600 x 300 x 300 mm.

107
       
605 HDE

Double side bolstered standard half end component.
300 x 300 x 300 mm.

60
       
600 SFF

Standard component with flat facing suitable for signage.
600 x 300 x 300mm.

90
       
605 HFF

Half standard component with flat facing suitable for signage.
300 x 300 x 300mm.

45
       
600 SNF

Standard blank component without facing.
600 x 300 x 300mm.

90
 
   
605 HNF

Half Standard blank component without facing.
300 x 300 x 300mm.

47
 
   
600 NFC

No face convex component.
600 [ on face ] x 300 x 300mm.
90
       
605 HNC

Half convex component without facing.
300 [ on face ] x 300 x 300mm.
46
 
   
600 RSS
As for 600 SSS with 86mm dia. relief pipe.
Approximately every third or fourth unit in run.
93
 
   
600 RNS
As for 600SNF with 90mm dia. relief pipe.
Approximately every third or fourth unit in run.
89
 
   
600 RSC
As for 600NSC with 90mm dia. relief pipe.
Approximately every third or fourth unit in run.
92
 
   
600 RNC
As for 600NFC with 90mm dia. relief pipe.
Approximately every third or fourth unit in run.
88
 
Dry Mix Components.
       
Component
Part No
Diagram
(not to scale)
Description
Approx Weight
(kg)
       
600 NSV

Bolstered veneer used to match Loc-A-Bloc structures with existing walls. 600 x 300 x 55 mm.

5
       
600 SPB

Pier block bolstered on all four sides.
600 x 600 x 300 mm.

220
       
600 SPC

SStandard pyramid cap for use with the pier block.
700 x 700 x 70/115 mm.

86
       
600 SAC

Standard apex cap.
600 x 360 x 50/70 mm.

23
       
650 SBC

Single bolstered edge capping.
600 x 400 x 50 mm.

20
       
650 DBC

Double bolstered edge capping.
600 x 400 x 50 mm.

18
       
680 SBC

Single bolstered edge capping.
600 x 400 x 80 mm.

32
       
680 DBC

Double bolstered edge capping.
600 x 400 x 80 mm.

32
       
680 SRC

Single rounded edge capping incorporating drip moulds.
600 x 400 x 80 mm.

32
       
680 DRC

Double rounded edge capping incorporating drip moulds.
600 x 400 x 80 mm.

32
     
900 STB

Standard stair tread, front edge bolstered.
900 x 400 x 45 mm.
29
     
900 SRP

Standard stair riser.
900 x 150 50 mm.

12
     
Single Pour Wall Components.
       
Component
Part No
Diagram
(not to scale)
Description
Approx Weight
(kg)
       
600 FNS
No face standard footing component.
600 x 300 x 300mm with 60mm cut out of two back corners.
89
       
600 FSS
Single side standard footing component.
600 x 300 x 300mm with 60mm cut out of two back corners.
94
       
600 FNC
No face convex footing component.
600 [on face] x 300 x 300mm with 60mm cut out of two back corners.
89
       
600 FSC
Single side convex footing component.
600 [on face] x 300 x 300mm with 60mm cut out of two back corners.
94

Click here to download "Component List" PDF Version of this page for printing

       
     
       
     
     
|  ©2008 - 2013 LOC-A-BLOC Australia Pty Ltd  | E: office@locabloc.com.au  |  T: (02) 4648 1187  |  Disclaimer |
|  Website by D-Zine Group |

LOC-A-BLOC - The Retaining Wall Construction System designed for Australian conditions.
Australian Owned, Made and Designed
Contact Us for your next Retaining Wall Solution - Residental and Commercial Projects - New South Wales, Australia