Classic Feature Retaining Wall Solutions   |  LOC-A-BLOC - Australian Owned, Made and Designed   |  NSW - Australia  |

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

     

About LOC-A-BLOC.

LOC-A-BLOC is a retaining wall construction system which was designed for Australian conditions.  The original LOC-A-BLOC concept was designed in the 1990’s, with the main reason being to design a retaining wall system specifically for use in marine applications.

The basic LOC-A-BLOC construction system consists of a concrete block with horizontal and vertical hexagonal cores, with a unique, coloured, pressed block in rock or smooth face, which is exclusive to the LOC-A-BLOC system.

The method of construction is the blocks are dry laid, meaning no mortar is required between the courses, and once the wall is at the desired height, the cores are then filled with concrete or gravel, depending on the engineering requirements.

There are three component sizes with distinct uses in the LOC-A-BLOC system:

400 Series  
Dimensions: 400mm x 200mm x 200mm
Weight: 27kg
Use: For small, low walls, freestanding, cantilever up to 1.8m or soil reinforced up to 6m - easily constructed by hand.

(Residential and small commercial applications, 25 - 32mpa)
 
600 Series
Dimensions: 600mm x 300mm x 300mm
Weight: 95kg
Use: For engineered solutions on low walls with high surcharge, freestanding, cantilever, single skin up to 3m or soil reinforced up to 10m.

(Commercial, civil and marine applications, 25 - 40mpa)
 
1800 Series
Dimensions: 1800mm x 900mm x 900mm
Weight: 2.56 ton
Use: For engineered solutions on mass gravity from 0.9m up to 2.7m - gravel fill, cantilever up to 8m or soil reinforced up to 20m.

(Commercial, civil, infrastructure works and marine applications (25 - 40mpa)
     
     
|  ©2008 - 2013 LOC-A-BLOC Australia Pty Ltd  | E: office@locabloc.com.au  |  T: (02) 4648 1187  |  Disclaimer |
|  Website by D-Zine Group |

LOC-A-BLOC - The Retaining Wall Construction System designed for Australian conditions.
Australian Owned, Made and Designed
Contact Us for your next Retaining Wall Solution - Residental and Commercial Projects - New South Wales, Australia